适用：

适用于医药品、化工、食品、电子、中药等行业的物料干燥。

Application:

User for chemical industry, food, electron, chinese native medicine the profession and others.

特色：

方型直立式（蒸汽加热） 真空下物料溶液的沸点降低，使蒸发器的传热推动力增大，因此对一定的传热量，可以节省蒸发器的传热面积。 蒸发操作的热源可以采用低压蒸汽或废热蒸汽。 使用温度：80℃（可调式） 内部分布：常压±<3%℃ 真空±>5%℃ 使用真空度：0-759mmHg（0.1Tott）

机构耐压：

10-4Torr Feature: Square vertical (Steam heating) Under the vacuum condition, the raw material's boiling pint is lowered to enchance the capability of heat transmittion of evaporator. Therefore, for certain heat trasmission amount, it can save its area of the evaporator.
1. Heat source for evaporates the operation to be allowed to use low pressure steam or the waste heat steam.
2. Operation temperature, 80℃（adjustable）
3. Internal distribution, atmospheric pressure ±<3%℃
4. Vacuum ±>5%℃
5. Operation vacuum, 0-759mmHg（0.1Tott）
6. Organization pressure resistance, 10-4Torr

结构：

内以304端板，氩弧焊接，抛光处理300#以上，角槽钢补强，防止变形，中层岩棉保温隔热外，304不锈钢板组合，门板使用304，抛光外层，槽钢补强及保温。 四周焊接组合，内部以抛光及酸洗处理。 活动式水盘架，L型钢，每层底部直接加热水盘，使加热迅速，温度分布均匀。 304加热水盘，内具有多行导流板。 水盘架，后面进出蒸汽管各1支，由后壁外侧衔接，防泄漏及易清洗。 门面右开，12Ф硅胶包装一体成型密闭，特殊夹具4组栓紧，防漏气。

Structure:

Interior use 304 stainless steel, welding (argon). Polish 300# mesh. Corner iron makes up strongly prevents the distortion. Insulation by rock wool exterior 304 stainless steel. All around welds the combination, the interior polishes and passivate processing.
1. Surrounding welding combination, polished and acid pickling inside
2. Water tray rack, adjustable, L structural steel, each layer of bottom direct to inject water into water tray, enable heats up fast and temperature distribution is even.
3. 304 heating water plate, multiple guide plate inside
4. Water tray rack, steam inlet/ outlet with steam piping from back connect, prevent divulges and is easy to clean.
5. Door right open. Silicon packing 12Ф to seal. Special clamp to prevent divulges.